[desktop] iAuditor, the web based platform
The template editor for the iAuditor website works in a similar fashion to the iAuditor app. To move items or add new ones, simply click and drag the item. To create a new template, log into iAuditor and hover over the collapsed left-hand menu bar. With the menu bar expanded select the “Templates” option
Once the Templates screen opens, you will see a list of your Templates displayed on the screen.
In the upper right-hand corner select the “new templates” button.
You can confirm you are on the templates menu by noting the blue templates icon is highlighted in the collapsed menu bar.
Once you have created a new template, you can give it a name by clicking in the top field on the left-hand side of the screen. You can also write a brief description.
The “View more options +” button allows you to change the Document Numbering.
To allow yourself more room to view the template field options available in the menu consider collapsing the upper menu
The Title Page in the template editor contains default Header Fields. Header fields can set the Inspection Title, Document Number and other details that are visible on your list of inspection. They can also be used to generate the file name of exported inspection. If a header field has been removed from your Title Page, it can only be replaced with the same header field.
Nesting (aka ‘indenting’) is the process of organizing items to be in line with each other.
You can see below that each of the Question items are aligned and sitting neatly under the category.
A blue outline can be seen when creating a new item or moving an existing one. This outline indicates where the item will snap to when your mouse button releases. The outline also allows you to see indentation while adding/moving an item.
Nesting is also what makes both Smart Fields and Dynamic Fields work. Without proper layout and correct indentation, they will do nothing. It should be as follows:
Editing/Deleting Individual Fields
To edit an item, click once on it to see it expand. Depending on the item type, you will then be able to change its text and other options.
To delete an item from the template, click on the red ‘x’ on the right-hand side of the item. A confirmation box will pop-up on the screen, and you can remove the item.
Keep in mind that when deleting a parent item, all items nested underneath will be deleted along with their parent item. If you prefer for the “children” items not to be deleted with the parent simply drag and drop “children” items above their corresponding parent to remove the nesting.
Bulk Add Questions
Input large sets of questions and it will automatically populate your template for you. Not only will this save you loads of time, you are able to set Failed Responses in bulk. Read more about why Failed Responses are so important.
Build Multiple Templates Fast With The Copy & Paste Tool
Click ‘copy to clipboard’ to copy entire categories of questions.
The question sets will be saved to a clipboard that can be accessed whenever you create a new template.
In your new template click ‘paste questions from clipboard’ and they will appear with the question, response sets and attachments.
Preview Your Template
To preview how your template will look during an inspection, click the ‘Preview’ button in the Template Editor.
Moving Existing Items
Moving items is almost the same as adding in new ones. Click and drag any item in your template and you will be able to move it to a new position.
Moving a “parent item” will also move all it’s children as well. For example, take a Category item with three Question items indented underneath. Moving that Category item, would also move the three questions with it.
The Duplicate button must first be toggled on (it will turn blue). Once activated, move any item into a new position as you normally would. A copy of the item (or items), will be left at the new spot.
Don’t forget to click Duplicate again when you’re done to deactivate it. See all of this in action just below:
The SafetyCulture Template Editor allows you to duplicate (copy) entire sections and create an additional, new section within your template. To duplicate expand the “sections” menu in the upper right hand corner of the template editor.
Select the “edit” button next to the Template Sections header to turn on editing mode.
Once editing mode is toggled on, icons will appear to copy/delete existing sections.
Choose the copy icon to duplicate an existing section. The system will create a new section with “-duplicate” tag added to the end of the section name to identify it as a copy.
Deselect the “edit” button to turn off editing mode and begin to navigate again between sections and/or continue to edit your template section as before.
While in edit mode sections can also be rearranged (using toggle arrows) or renamed by clicking the section and entering a new name into the popup naming screen.
New Feature: Mandatory ‘Mark Inspection as Complete’
This feature is currently only able to be set on templates that are accessible via your mobile device; to set this feature for a template, ensure it is synced to your mobile device first.
iAuditor has the ability to require an auditor to Complete the inspection before it is considered finished. Follow the steps below to activate this feature.
Launch the iAuditor app, then tap on the 'Templates' section.
From here, tap the template you wish to work with, and tap 'Edit' in the top right corner.
|After that, tap the 'Details' heading, followed by the gear/cog icon in the top left.|
|Afterwards, tap the switch next to 'Mandatory Mark as Complete' to ON.|
Tap on the template in your account, then tap 'Edit Template.'
|Tap the 3 dots in the upper right corner.|
|Now tap 'Template Settings.'|
|From here, tap the checkbox next to Mandatory Mark as Complete.|
[Apple device] iOS
Launch iAuditor, and tap on the “Templates” view. The first time you use the app you should see the following:
Tap on the “+” button at the bottom. Three options will be available. Select “Create Template”.
The Template Editor will open to the “Fields” section. There are three options across the top menu bar: Fields, Cover and Details.
The “Fields” section is where you begin to create your template and add in the various field types (questions, multiple choice, etc.) to create your checklist.
The “Details” section allows you to give your template a name and description. You can also add an image to your template through the Template thumbnail. This can be the same image as your Profile logo, or it can be any other image in your device’s camera roll/image library.
The “Cover” option contains the title page and the default Header Fields.
Adding New Items
In the “Fields” section of the template editor, press the (+) icon in the middle of the menu to pull up the fields options. Tap and select the field type you want to add to your template. Field type will automatically add to the bottom of the inspection. Tap the field added to expand and add information related to your selected field. Common modifications to fields include: response values, weighting.
Setting failed items is only available on question field types.
To begin duplicating, tap on the “Duplicate” button next to “+” and tap and hold an item to duplicate it.
Duplicating is now activated, and any items that you tap, drag and drop will leave a copy in the new position. Be sure to tap on the “Finish” button to deactivate when you finish.
[Android device] Android
From the home screen in your templates menu press the (+) icon in the lower right-hand corner to create a new template.
The template editor will launch into the fields section. The “Fields” section is where you begin to create your template and add in the various field types (questions, multiple choice, etc.) to create your checklist.
The “Cover” option contains the title page and the default Header Fields. The “Details” section allows you to give your template a name and description. You can also add an image to your template through the Template thumbnail. This can be the same image as your Profile logo, or it can be any other image in your device’s camera roll/image library.
Adding New Items
In the “Fields” section of the template editor, press the (+) icon in the bottom right hand corner to pull up the fields options. Tap and select the field type you want to add to your template. Field type will automatically add to the bottom of the inspection. Tap the field added to expand and add information related to your selected field. Common modifications to fields include: response values, weighting.
Setting failed items is only available on question field types.
To begin duplicating, tap the 3 dots in the top right hand corner and select “Duplicate” from the dropdown menu.
Duplicating is now activated, and any items that you tap, drag and drop will leave a copy in the new position. tap on “Finish Duplicating” in the dropdown menu to deactivate the duplicating function.
Duplicating items that have other items nested/indented under it will also duplicate these items. You can also move and duplicate items between Sections. For more information, please see the article on Sections.